Mótar illuais, de ghnáth mótar leictreach asincrónach trí phas il-cuaille athróg. Is féidir le mótair illuais oibriú ar luasanna éagsúla ag brath ar chumraíocht cuaille. Úsáidtear an cineál mótair seo de ghnáth i roghanna illuais faoi choinníollacha ualaigh éagsúla, mar shampla lucht leanúna, caidéil, craenacha, uirlisí meaisín agus comhbhrúiteoirí.
Is mótair ionduchtaithe cage iora den chuid is mó iad mótair illuais, leis an struchtúr céanna le mótair leictreacha asincrónacha bunúsacha. Déanann ár gcuideachta mótair dé-luas chomh maith le mótair trí-luas.
Prionsabal Oibre
Is féidir le mótair illuais rith ar luasanna éagsúla. Baintear amach luasanna éagsúla trí athrú a dhéanamh ar an mbealach a nasctar foirceannadh an mhótair chun líon péirí cuaille an mhótair a athrú. Mar shampla, nuair a bhíonn tú ag aistriú ó nasc réalta dúbailte go nasc delta, laghdóidh luas an mhótair.
Cathain is gá duit mótar illuais a úsáid?
Éilíonn na cásanna seo a leanas go n-úsáidfí mótar illuais:
1. Ócáidí le héagsúlachtaí suntasacha ualaigh:
- Lucht leanúna agus caidéil: Nuair a athraíonn éileamh sreabhadh nó brú an chórais go minic, is féidir le mótar il-luas a luas a choigeartú de réir na gcoinníollacha oibre iarbhír chun na ceanglais oibriúcháin a chomhlíonadh faoi ualaí éagsúla. Mar shampla, i gcóras aerchóirithe, ní féidir le luas an lucht leanúna a choigeartú de réir athruithe teochta laistigh, ní hamháin compord a chinntiú ach freisin tomhaltas fuinnimh a laghdú.
- Craenacha agus trealamh ardaithe: Tá gá le luasanna éagsúla ag céimeanna éagsúla le linn ardaithe agus oibríochta. Is féidir le mótair illuais ardluais a sholáthar le linn ardaithe chun éifeachtúlacht oibre a fheabhsú agus aistriú go luas íseal le linn oibriú chun cobhsaíocht agus sábháilteacht a chinntiú.
2. Ócáidí nuair a éilíonn próisis shonracha rialáil luais:
- Uirlisí meaisín: Tá ceanglais luais éagsúla ag nósanna imeachta próiseála éagsúla. Is féidir le mótair illuais éagsúlacht roghanna luais a thairiscint d'uirlisí meaisín chun freastal ar riachtanais oibríochtaí próiseála éagsúla cosúil le muilleoireacht, druileáil agus meilt, rud a fheabhsóidh cruinneas agus éifeachtúlacht próiseála.
- Innealra teicstíle: Sa phróiseas táirgthe teicstíle, éilíonn próisis éagsúla luasanna éagsúla. Is féidir le mótair illuais an luas a choigeartú de réir riachtanais an phróisis teicstíle chun dul chun cinn rianúil an táirgeachta a chinntiú.
3. Ócáidí teoranta ó thaobh spáis: I gcásanna áirithe nuair a bhíonn an spás suiteála teoranta, tá sé dodhéanta il-mhótair a shuiteáil le luasanna éagsúla ag an am céanna. Is féidir le mótair illuais luasanna iomadúla a bhaint amach ar mhótar amháin, rud a shábháil spás suiteála agus costas.
Mótar dé-luas
|
Cineál |
Cumhacht (kw) |
Reatha |
Luas Sioncrónach |
Éifeachtúlacht |
fachtóir cumhachta |
|
4/2 cuaille 1500/3000rpm |
|||||
|
YD-90S-4/2 |
0.85/1.1 |
2.3/2.8 |
1500/3000 |
74/71 |
0.77/0.85 |
|
YD-90L-4/2 |
1.3/1.8 |
3.3/4.3 |
1500/3000 |
76/73 |
0.78/0.85 |
|
YD-100L1-4/2 |
2/2.4 |
4.8/5.6 |
1500/3000 |
78/76 |
0.81/0.86 |
|
YD-100L2-4/2 |
2.4/3 |
5.6/6.7 |
1500/3000 |
79/77 |
0.83/0.89 |
|
YD-112M-4/2 |
3.3/4 |
7.4/8.6 |
1500/3000 |
82/79 |
0.83/0.89 |
|
YD-132S-4/2 |
4.5/5.5 |
9.8/11.9 |
1500/3000 |
83/79 |
0.84/0.89 |
|
YD-132M-4/2 |
6.5/8 |
13.8/17.1 |
1500/3000 |
84/80 |
0.85/0.89 |
|
YD-160M-4/2 |
9/11 |
18.5/22.9 |
1500/3000 |
87/82 |
0.85/0.89 |
|
YD-160L-4/2 |
11/14 |
22.3/28.8 |
1500/3000 |
87/82 |
0.86/0.90 |
|
YD-180M-4/2 |
15/18.5 |
29.4/36.7 |
1500/3000 |
89/85 |
0.87/0.90 |
|
YD-180L-4/2 |
18.5/22 |
35.9/42.7 |
1500/3000 |
89/86 |
0.88/0.91 |
|
YD-200L-4/2 |
26/30 |
49.9/58.3 |
1500/3000 |
89/85 |
0.89/0.92 |
|
YD-225S-4/2 |
32/37 |
60.7/71.0 |
1500/3000 |
90/86 |
0.89/0.92 |
|
YD-225M-4/2 |
37/45 |
69.4/86.4 |
1500/3000 |
91/86 |
0.89/0.92 |
|
YD-250M-4/2 |
45/52 |
84.4/98.7 |
1500/3000 |
91/87 |
0.89/0.92 |
|
YD-280S-4/2 |
60/72 |
108.9/135.1 |
1500/3000 |
91/88 |
0.90/0.92 |
|
YD-280M-4/2 |
72/82 |
133.6/152.2 |
1500/3000 |
91/88 |
0.90/0.93 |
|
6/4 cuaille 1000/1500rpm |
|||||
|
YD-90S-6/4 |
0.65/0.85 |
2.2/2.3 |
1000/1500 |
64/70 |
0.68/0.79 |
|
YD-90L-6/4 |
0.85/1.1 |
2.8/3.0 |
1000/1500 |
66/71 |
0.70/0.79 |
|
YD-100L1-6/4 |
1.3/1.8 |
3.8/4.4 |
1000/1500 |
74/77 |
0.70/0.80 |
|
YD-100L2-6/4 |
1.5/2.2 |
4.3/5.4 |
1000/1500 |
75/77 |
0.70/0.80 |
|
YD-112M-6/4 |
2.2/2.8 |
5.7/6.7 |
1000/1500 |
78/77 |
0.75/0.82 |
|
YD-132S-6/4 |
3/4 |
7.7/9.5 |
1000/1500 |
79/78 |
0.75/0.82 |
|
YD-132M-6/4 |
4/5.5 |
9.8/12.3 |
1000/1500 |
82/80 |
0.76/0.85 |
|
YD-160M-6/4 |
6.5/8 |
15.1/17.4 |
1000/1500 |
84/82 |
0.78/0.84 |
|
YD-160L-6/4 |
9/11 |
20.6/23.4 |
1000/1500 |
85/83 |
0.78/0.85 |
|
YD-180M-6/4 |
11/14 |
25.9/29.8 |
1000/1500 |
85/84 |
0.76/0.85 |
|
YD-180L-6/4 |
13/16 |
29.4/33.6 |
1000/1500 |
86/85 |
0.78/0.85 |
|
YD-200L-6/4 |
18.5/22 |
41.4/44.9 |
1000/1500 |
87/86.5 |
0.78/0.86 |
|
YD-225S-6/4 |
22/28 |
44.2/56.5 |
1000/1500 |
88/86.5 |
0.86/0.87 |
|
YD-225M-6/4 |
26/32 |
52.2/63.2 |
1000/1500 |
88/85.5 |
0.86/0.90 |
|
YD-250M-6/4 |
32/42 |
62.1/81.1 |
1000/1500 |
90/86.5 |
0.87/0.91 |
|
YD-280S-6/4 |
42/55 |
81.5/106.7 |
1000/1500 |
90/87 |
0.87/0.90 |
|
YD-280M-6/4 |
55/67 |
106.7/131.5 |
1000/1500 |
90/87 |
0.87/0.89 |
|
8/4 cuaille 750/1500rpm |
|||||
|
YD-90L-8/4 |
0.45/0.75 |
1.9/1.8 |
750/1500 |
58/72 |
0.63/0.87 |
|
YD-100L-8/4 |
0.85/1.5 |
3.1/3.5 |
750/1500 |
67/74 |
0.63/0.88 |
|
YD-112M-8/4 |
1.5/2.4 |
5.0/5.3 |
750/1500 |
72/78 |
0.63/0.88 |
|
YD-132S-8/4 |
2.2/3.3 |
70./7.1 |
750/1500 |
75/80 |
0.64/0.88 |
|
YD-132M-8/4 |
3/4.5 |
9.0/9.4 |
750/1500 |
78/82 |
0.65/0.89 |
|
YD-160M-8/4 |
5/7.5 |
13.9/15.2 |
750/1500 |
83/84 |
0.66/0.89 |
|
YD-160L-8/4 |
7/11 |
19/21.8 |
750/1500 |
85/86 |
0.66/0.89 |
|
YD-180L-8/4 |
11/17 |
26.7/32.8 |
750/1500 |
87/88 |
0.72/0.91 |
|
YD-200L1-8/4 |
14/22 |
33.0/41.3 |
750/1500 |
87/88 |
0.74/0.92 |
|
YD-200L2-8/4 |
17/26 |
40.1/48.8 |
750/1500 |
87/88 |
0.74/0.92 |
|
YD-225M-8/4 |
24/34 |
53.2/66.7 |
750/1500 |
89/88 |
0.77/0.88 |
|
YD-250M-8/4 |
30/42 |
64.9/78.8 |
750/1500 |
90/89 |
0.78/0.91 |
|
YD-280S-8/4 |
40/55 |
83.5/102 |
750/1500 |
91/90 |
0.80/0.91 |
|
YD-280M-8/4 |
47/67 |
96.9/122.9 |
750/1500 |
91/90 |
0.81/0.92 |
|
8/6 cuaille 750/1000rpm |
|||||
|
YD-90S-8/6 |
0.35/0.45 |
1.6/1.4 |
750/1000 |
56/70 |
0.60/0.72 |
|
YD-90L-8/6 |
0.45/0.65 |
1.9/1.9 |
750/1000 |
59/71 |
0.60/0.73 |
|
YD-100L-8/6 |
0.75/1.1 |
2.9/3.1 |
750/1000 |
65/75 |
0.60/0.73 |
|
YD-112M-8/6 |
1.3/1.8 |
4.5/4.8 |
750/1000 |
72/78 |
0.61/0.73 |
|
YD-132S-8/6 |
1.8/2.4 |
5.8/6.2 |
750/1000 |
76/80 |
0.62/0.73 |
|
YD-132M-8/6 |
2.6/3.7 |
8.2/9.4 |
750/1000 |
78/82 |
0.62/0.73 |
|
YD-160M-8/6 |
4.5/6 |
13.3/14.7 |
750/1000 |
83/85 |
0.62/0.73 |
|
YD-160L-8/6 |
6/8 |
17.5/19.4 |
750/1000 |
84/86 |
0.62/0.73 |
|
12/6 cuaille 500/1000rpm |
|||||
|
YD-160M-12/6 |
2.6/5 |
11.6/11.9 |
500/1000 |
74/84 |
0.46/0.76 |
|
YD-160L-12/6 |
3.7/7 |
16.1/15.8 |
500/1000 |
76/85 |
0.46/0.79 |
|
YD-180L-12/6 |
5.5/10 |
16.5/20.5 |
500/1000 |
79/86 |
0.54/0.86 |
|
YD-200L1-12/6 |
7.5/13 |
24.5/26.4 |
500/1000 |
83/87 |
0.56/0.86 |
|
YD-200L2-12/6 |
9/15 |
28.9/30.1 |
500/1000 |
83/87 |
0.57/0.87 |
|
YD-225M-12/6 |
12/20 |
35.2/39.7 |
500/1000 |
85/88 |
0.61/0.87 |
|
YD-250M-12/6 |
15/24 |
42.1/47.1 |
500/1000 |
86/89 |
0.63/0.87 |
|
YD-280S-12/6 |
20/30 |
54.8/58.9 |
500/1000 |
88/89 |
0.63/0.87 |
|
YD-280M-12/6 |
24/37 |
63.8/72.6 |
500/1000 |
88/89 |
0.65/0.87 |
Mótar Trí-luas
|
Cineál |
Cumhacht (kw) |
Reatha |
Luas Sioncrónach |
Éifeachtúlacht |
fachtóir cumhachta |
|
6/4/2pole 1000/1500/3000rpm |
|||||
|
YD-100L-6/4/2 |
0.75/1.3/1.8 |
2.6/3.7/4.5 |
1000/1500/3000 |
67/72/71 |
0.65/0.75/0.85 |
|
YD-112M-6/4/2 |
1.1/2/2.4 |
3.5/5.1/5.8 |
1000/1500/3000 |
73/74/74 |
0.65/0.81/0.85 |
|
YD-132S-6/4/2 |
1.8/2.6/3 |
5.1/6.1/7.4 |
1000/1500/3000 |
75/78/71 |
0.71/0.83/0.87 |
|
YD-132M1-6/4/2 |
2.2/3.3/4 |
6.0/7.5/8.8 |
1000/1500/3000 |
77/80/76 |
0.72/0.84/0.91 |
|
YD-132M2-6/4/2 |
2.6/4/5 |
6.9/9/10.8 |
1000/1500/3000 |
80/80/77 |
0.72/0.84/0.91 |
|
YD-160M-6/4/2 |
3.7/5/6 |
9.5/11.2/13.2 |
1000/1500/3000 |
82/81/76 |
0.72/0.84/0.91 |
|
YD-160L-6/4/2 |
4.5/7/9 |
11.4/15.1/18.8 |
1000/1500/3000 |
83/83/79 |
0.72/0.85/0.92 |
|
8/4/2pole 750/1500/3000rpm |
|||||
|
YD-112M-8/4/2 |
0.65/2/2.4 |
2.7/5.1/5.8 |
750/1500/3000 |
59/74/74 |
0.63/0.81/0.85 |
|
YD-132S-8/4/2 |
1/2.6/3 |
3.6/6.1/7.1 |
750/1500/3000 |
69/78/74 |
0.61/0.83/0.87 |
|
YD-132M-8/4/2 |
1.3/3.7/4.5 |
4.6/8.4/10.0 |
750/1500/3000 |
71/80/75 |
0.61/0.84/0.91 |
|
YD-160M-8/4/2 |
2.2/5/6 |
7.6/11.2/13.2 |
750/1500/3000 |
75/81/76 |
0.59/0.84/0.91 |
|
YD-160L-8/4/2 |
2.8/7/9 |
9.2/15.1/18.8 |
750/1500/3000 |
77/83/79 |
0.6/0.85/0.92 |
|
8/6/4pole 750/1000/1500rpm |
|||||
|
YD-112M-8/6/4 |
0.85/1/1.5 |
3.7/3.1/3.5 |
750/1000/1500 |
62/68/75 |
0.56/0.73/0.86 |
|
YD-132S-8/6/4 |
1.1/1.5/1.8 |
4.1/4.2/4.0 |
750/1000/1500 |
68/74/78 |
0.60/0.73/0.87 |
|
YD-132M1-8/6/4 |
1.5/2/2.2 |
5.2/5.4/4.9 |
750/1000/1500 |
71/77/79 |
0.62/0.73/0.87 |
|
YD-132M2-8/6/4 |
1.8/2.6/3 |
6.1/6.8/6.5 |
750/1000/1500 |
72/78/80 |
0.62/0.73/0.87 |
|
YD-160M-8/6/4 |
3.3/4/5.5 |
10.2/9.9/11.6 |
750/1000/1500 |
79/81/83 |
0.62/0.76/0.87 |
|
YD-160L-8/6/4 |
4.5/6/7.5 |
13.8/14.5/15.6 |
750/1000/1500 |
80/83/84 |
0.62/0.76/0.87 |
Is féidir linn an tsamhail thuas de mhótar illuais a tháirgeadh, agus is féidir é a shaincheapadh de réir riachtanais an chustaiméara, fáilte romhat dul i dteagmháil lenár bhfoireann díolacháin le haghaidh comhairliúcháin.
Clibeanna Te: mótair luas il, monaróirí mótair luas il tSín, soláthraithe, monarcha
